Mountain Tactical Company is
proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your
Tikka T3 and Tikka T3x rifle.
Our
latest generation of recoil lugs are a significant upgrade from the second
generation of lugs. Previously, we used 316 marine grade stainless steel
which had a yield strength of 89,000 psi. This was a major improvement
from the factory aluminum lug which has a yield strength of 21,000 psi or the
T3x mild steel lug which has a yield strength of 36,000 psi (significantly less
than the standard psi generated by modern rifle cartridges). Now we have upgraded
the stainless steel we use to 17-4PH H900 stainless steel. The yield
strength of this remarkable steel is 200,000 psi.
That is 33% stronger than
Grade 5 Titanium!
This
is a similar system the Sako TRG-42 utilizes without the $3,500 price tag!
We
proudly manufacture our Gen3 Elite Series Stainless Steel Recoil Lugs from
17-4PH H900 Stainless Steel for the ultimate in weather resistance and a
lifetime of service.
Installation
is simple. Simply remove the two action screws and separate your action
from the stock. Using a pair of pliers, remove the existing metal piece
from the stock. Then push the Elite Series Recoil Lug into the same
recess. Put your action and stock back together and tighten your action
screws. You are done!
Note
that sometimes it can take a little longer to line up your action and stock
because of the tighter tolerances of our recoil lug.
The
Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the
finest quality you will find anywhere.
Specifications:
Material – 17-4ph H900 Stainless
Steel